Custom display projects
Custom Acrylic Shoe & Footwear Displays
POP82 fabricates custom footwear displays that present a shoe at the intended angle and height. Sole dimensions, product weight, handling and the supporting retail fixture shape the design.
Buena Park, California · POP82
Inside POP82
The details take shape
A view from the POP82 production film. Define the material, dimensions and finish in your project brief.
Plan the project details
- Sole dimensions and weight
- Display angle
- Fixture or shelf size
Define the shoe, the angle and the support
A small sample shoe and a heavy boot place different demands on a stand. Send sole length, width and representative weight, then identify the viewing angle and the portion of the shoe that should remain visible. State whether the display holds one shoe or a pair.
Include packaging or accessories if they are part of the presentation. Reference photographs are useful, but the support geometry should be checked against actual dimensions.
Plan how the stand meets the store fixture
Countertop risers, shelf stands and components attached to an existing fixture have different interfaces. Supply the shelf depth, available height, mounting details and any restrictions on drilling or fastening. Freestanding pieces also need a review of stability and customer handling.
- Shoe dimensions, weight and range of sizes.
- Contact areas on the sole or heel.
- Required elevation and viewing angle.
- Counter, shelf or supplied fixture dimensions.
- Graphic panels and price information.
Use branding without hiding the product
Position printed panels and logos after the shoe geometry is established. A graphic that reads well on an empty stand may disappear behind the shoe. Include the product and brand artwork in the same sample review.
If a campaign changes seasonally, identify the panels that need replacement. A removable graphic component can be considered during design rather than added after the structure is built.
Prepare for samples and store distribution
Send the sample quantity separately from the planned production quantity. Agree on the drawing, surface finish and product fit before the run is released. Determine whether staff receive a ready-to-place stand or a kit with hardware and assembly instructions.
Explore footwear displays
- Project brief
Shoe Display Risers
A shoe riser sets a single footwear item at the intended viewing angle while keeping the support visually secondary.
- Project brief
Sneaker Display Supports
Sneaker supports can emphasize the side profile, sole or packaging depending on the merchandising story.
- Project planning guide
Insole Package Display Planning
Tall insole packages need stable presentation and a layout that keeps size information readable.
- Project planning guide
Shoe Care Product Display Trays
Shoe-care assortments combine bottles, brushes and packaged accessories with different support needs.
Before the next step
Questions about your project
Clear answers for planning, approvals and your production brief.
Can a shoe display fit multiple footwear sizes?
A common stand may work across a defined size range. Review representative small and large products, their weights and the intended contact points before confirming the design.
Can POP82 make a riser for an existing retail shelf?
Send the shelf dimensions and any mounting restrictions with the footwear details. The team can review a riser or stand around that existing fixture.
Should I send actual footwear for the sample review?
A representative product helps verify support and presentation. Arrange any sample delivery with POP82 first; dimensions and photographs can start the discussion.
How do I measure the space for Footwear displays?
Record the usable footprint, overall height and access clearance. The brief for Footwear displays should resolve sole dimensions and weight; a photograph alone does not establish fit. Include an actual product or measured drawing when possible.
What should a sample review cover for Footwear displays?
Check product fit, visibility, handling and the parts that staff will touch. For Footwear displays, include display angle in the review record and identify which drawing or sample was accepted before repeating the build.
Can versions of Footwear displays be combined in one bulk inquiry?
List each configuration and quantity separately, even when the designs look similar. Keep sole dimensions and weight and display angle attached to their corresponding version so the quote does not assume every unit is identical.
How should I specify the finish on Footwear displays?
Mark customer-facing surfaces, exposed edges and any printed areas on the drawing. Review the finish alongside sole dimensions and weight, and use an agreed physical reference where appearance matters. A material name does not define every surface detail.
What artwork belongs in the brief for Footwear displays?
Supply the intended graphic dimensions, viewing direction and current artwork revision. Check that logos and messages remain visible around display angle. Label any placeholders so they are not treated as approved production art.
How do I plan shipping protection for Footwear displays?
Describe whether the unit ships assembled or as components, which surfaces must not rub, and who unpacks it. Include fixture or shelf size in the packing review before assigning quantities to cartons or locations.
What affects the quote scope for Footwear displays?
Material, geometry, finish, artwork, quantity and packing all influence the work to review. Keep sole dimensions and weight consistent when comparing quantity options; changing the specification at the same time prevents a like-for-like comparison.
What should I know about “define the shoe, the angle and the support” for footwear displays?
A small sample shoe and a heavy boot place different demands on a stand. Send sole length, width and representative weight, then identify the viewing angle and the portion of the shoe that should remain visible. State whether the display holds one shoe or a pair. Include packaging or accessories if they are part of the presentation. Reference photographs are useful, but the support geometry should be checked against actual dimensions.
What should I know about “plan how the stand meets the store fixture” for footwear displays?
Countertop risers, shelf stands and components attached to an existing fixture have different interfaces. Supply the shelf depth, available height, mounting details and any restrictions on drilling or fastening. Freestanding pieces also need a review of stability and customer handling.
What should I know about “use branding without hiding the product” for footwear displays?
Position printed panels and logos after the shoe geometry is established. A graphic that reads well on an empty stand may disappear behind the shoe. Include the product and brand artwork in the same sample review. If a campaign changes seasonally, identify the panels that need replacement. A removable graphic component can be considered during design rather than added after the structure is built.
What should I know about “prepare for samples and store distribution” for footwear displays?
Send the sample quantity separately from the planned production quantity. Agree on the drawing, surface finish and product fit before the run is released. Determine whether staff receive a ready-to-place stand or a kit with hardware and assembly instructions.
Explore related services and guides
Your next project
Let’s make the brief real.
Share dimensions, quantity, artwork and your target date with our Buena Park team.
